Software Downloads
Files available for download are listed in the tables below.
Notes on user registration:
Register here to download the CyanIDE 2 installation package.
Many documents and example applications may be downloaded, without registration, from the documentation page here. However, some of the more advanced application examples require registration on the users' forum here before downloading.
CyanIDE 2
The latest version of the CyanIDE development software tools is V2.1.1. It supports the eCOG1X and eCOG16 device families.
Notes:
- CyanIDE 2 does not support the eCOG1k device. Customers using the eCOG1k should continue to use CyanIDE 1.4.X.
- CyanIDE 2 requires the new eCOG1X USB eICE programming adaptor using the eCOG1X5A5. It does not support the older eICE adaptor based on the FTDI USB device.
Contact Cyan Sales for more information. - Existing eCOG1X USB eICE adaptors used with CyanIDE 1.4 are suitable for use with CyanIDE 2. However, CyanIDE 2 and CyanIDE 1.4 require different firmware on the eICE adaptor.
A firmware upgrade can be performed from within CyanIDE 2, and subsequently can be reversed using CyanIDE 1.4 if required. - CyanIDE 2 and CyanIDE 1.4.X can be installed on the same machine. They install into different directories and do not share path or environment variables.
- CyanIDE 2 is supported under Windows XP and Windows Vista only. It is not supported under Windows 2000 or earlier versions.
System Requirements for CyanIDE V2.1.1
- A Windows-based PC system.
(minimum 1GHz CPU speed, higher speed recommended). - Windows XP or Windows Vista operating system.
- 1GB free disk space.
- 512MB memory (1GB recommended).
- A spare USB port.
- A spare serial port (optional).
- System administrator privileges are required for software installation.
CyanIDE 2 Software Downloads
| Download | Last Updated |
|
|---|---|---|
| CyanIDE V2.1.1 Full Version | 09-01-2009 |
|
| CyanIDE 2 Release Notes | 12-01-2009 |
|
CyanIDE 1.4
The latest version of the CyanIDE 1.4 development software tools is V1.4.5. It supports the eCOG1k and eCOG1X device families.
Notes:
- Any previous version of CyanIDE must be uninstalled before installing CyanIDE V1.4.X.
- The parallel port debug interface used on the V1.2 eCOG1k development board is no longer supported in CyanIDE V1.4. Customers still using this board should stay with CyanIDE V1.3.
CyanIDE 1.4 Software Downloads
| Download | Last Updated |
|
|---|---|---|
| CyanIDE V1.4.5 Full Version | 08-10-2008 |
|
| Download | Last Updated |
|
|---|---|---|
| CyanIDE Data Sheet | 15-11-2004 |
|
| CyanIDE V1.4 User Manual |  pdf - 2.5MB html |
23-01-2008 |
| CyanIDE V1.4.X Release Notes | 08-10-2008 |
|
| CyanIDE V1.4 Known Issues | 08-10-2008 |
|